Nowadays, the laser marking machine, which is an emerging marking device, has been recognized by customers for its excellent performance and can be used in different industries. The laser marking machine uses a laser beam on various surface surfaces. Put a permanent mark. Last time for the working principle of the fiber laser marking machine, the following describes the installation requirements of the laser marking machine:

Before installing the laser marking machine, keep the body as clean as possible; keep the dry, dust-free optical equipment in the environment of 10 ° C to 35 ° C. It is often necessary to ensure a separate enclosed workshop to ensure that the room temperature, the floor should be ground paint or tiles, and that air conditioning is installed.

The customer should provide main power support, at least 2500w single-phase AC power supply, and the laser marking machine must be installed in the main power air switch, protection; triangular plug is strictly prohibited.

The main power supplied by the customer must be on the ground. It is strictly forbidden to connect to the virtual.

It is best to use deionized water circulating water tank cooling water. If there is no deionized water, you can use distilled water instead; after circulating the circulating water, it should be replaced in time (at least two weeks of water), so as not to affect the efficiency of the laser.

Install the optical bench back cover and the semiconductor red light indication. Since the light of the laser is invisible to the naked eye, a red laser is used as a reference for the optical path. The red light must be in the same direction as the laser, so the light path requiring red light is parallel to the optical bench, and the height is consistent with the center height of the YAG bar.

Fixed laser marking machine front baffle: Install the front baffle, and adjust the red light just from the center of the front baffle exit hole.

The above is some of the requirements for installing a laser marking machine. At present, the laser marking machine is mainly used in some occasions requiring more precise and higher precision. Such as electronic components, integrated circuits (IC), electrical appliances, mobile communications, hardware products, tool accessories, precision equipment, glasses and clocks, jewelry, auto parts, plastic buttons, building materials, PVC pipe